Working now in Trammel, Tokuno, and Malas!
On a side note, the debug window opens when you login now
Spellbooks don't seem to be working now though
Pages don't turn, no tooltips, can't cast from them, and can't right-click to assign hotkey (just closes it instead).
No errors in log.
ok, today there seems to be an insane lag, is impossible to fix anything when you can't even enter the game properly
Looks like spellbooks are working againok, today there seems to be an insane lag, is impossible to fix anything when you can't even enter the game properly
Not sure if you changed anything, or I just had a very odd issue last night!I was able to load Pinco's without any lag just now, perhaps it's shard/regional specific? Or just coincidental timing when switching to normal EC?
Hmm, it may be related to certain elements on the screen. When I open the Character Sheet, I get crippling lag, but it goes away when I close it. Perhaps there are other windows that are triggering this as well?Looks like spellbooks are working again
I was able to load Pinco's without any lag just now, perhaps it's shard/regional specific? Or just coincidental timing when switching to normal EC?
I tried that I couldn't even move, so it's not UI related
yes, it wasn't UO related either I had problems with certain websites too, but now it seems all betterLooks like spellbooks are working again
I was able to load Pinco's without any lag just now, perhaps it's shard/regional specific? Or just coincidental timing when switching to normal EC?
I can't replicate the issue, it seems to be work fine for me...Spellbooks don't seem to be working now though
Pages don't turn, no tooltips, can't cast from them, and can't right-click to assign hotkey (just closes it instead).
No errors in log.
both should be working fine now
Ok, as always I missed something crucial to the bug... Just tested again and they work if opened directly from the backpack; However, if you put them on a hotbar and open them through the hotbar, they don't work
that was the key, now it should workOk, as always I missed something crucial to the bug... Just tested again and they work if opened directly from the backpack; However, if you put them on a hotbar and open them through the hotbar, they don't work
The pet controls bar and mount blockbar are mandatory, you can't (and shouldn't) remove them. Doing so may cause problems. Besides if you remove the mount blockbar you lose the mount/dismount button too.
Last Function Called: ReplaceTokens(The item color ID is: ~1_ID~,{ L"33813" })
Error Message: Script Call failed - Error while calling [DyeTubs.DyeTubsParsing]:
[string "UserInterface/Pinco's UI/Source/Gumps/DyeTubs/DyeTubs.lua"]:1123: attempt to index field '?' (a nil value)I can't replicate the issue, it could happen only if there is a new hair dye menu, and if there is I can't find it because normal and bright hair dye work fine at the vendor I tried it
it's working for me, check for errors...hiya
macros are not repeating...
cannot right click macros in the macro list either
View attachment 76576
Thanks
Last Function Called: PaperdollWindow.ItemMouseOver( 0.0000, 3.5557, 1063.8481 )
Error Message: Script Call failed - Error while calling [PaperdollWindow.ItemMouseOver]:
[string "UserInterface/Pinco's UI/Source/Character/PaperdollWindow/PaperdollWindow.lua"]:776: attempt to index field '?' (a nil value)Last Function Called: PaperdollWindow.SlotLButtonUp( 0.0000, 15.4242, 7.1884 )
Error Message: Script Call failed - Error while calling [PaperdollWindow.SlotLButtonUp]:
[string "UserInterface/Pinco's UI/Source/Character/PaperdollWindow/PaperdollWindow.lua"]:696: attempt to index field '?' (a nil value)Last Function Called: PaperdollWindow.SlotLButtonDblClk( 0.0000, 15.4242, 7.1884 )
Error Message: Script Call failed - Error while calling [PaperdollWindow.SlotLButtonDblClk]:
[string "UserInterface/Pinco's UI/Source/Character/PaperdollWindow/PaperdollWindow.lua"]:728: attempt to index field '?' (a nil value)
I'm getting the same thing with Macros, right-click not working. Log:
Last Function Called: MacroWindow.OnItemRButtonUp( 0.0000, 29.9526, 16.5606 )
Error Message: Script Call failed - Error while calling [MacroWindow.OnItemRButtonUp]:
[string "UserInterface/Pinco's UI/Source/Hotbars/Macros/MacroWindow/MacroWindow.lua"]:522: attempt to index field 'ExportedMacros' (a nil value)this should be fixed now
this one I can't replicate, I tried with some public mannequins outside luna atlantic but they seems to work fine... if it keeps happening try to copy on TC a mannequin deed so I can do some tests
I'll try to get a deed to TC, looks like it's only causing issues with new/empty mannequins.this one I can't replicate, I tried with some public mannequins outside luna atlantic but they seems to work fine... if it keeps happening try to copy on TC a mannequin deed so I can do some tests
I don't know how to replicate the issue, the fps is always steady for me... there must be something that triggers that fps drop, but until we find that there isn't much that I can do about it :/
I'll nuke my User Data folder tonight and do some testing. I hate having to setup everything again, but better than playing at 6FPS
Completely wiped User Data folder (well renamed it), used brand new blank profiles/settings. I can open Character Sheet without lag only the first time logging into a character. As soon as I logout and log back in again (client restart not required), the FPS drops when Character Sheet opened everytime after that. Same behavior on 2 different computers. I can send you my profile if necessary, but since it does it on a brand new setup, they should just be blank profiles.
I have to do some tests, it looks like there is something eating up all the performance...I'm also now getting massive lag that is directly attributable to the UI. When I go back to the default UI that lag is completely gone. (I'll send a copy of my current profile) In fact, everyone I know is experiencing lag when using the UI.
Also, hotbars aren't staying minimized between sessions. I have a few I close, but they're always open again when I log back in.
do you have any stat from the character sheet moved on the hotbar or quick stat bar?
No, I actually didn't even know you could do that until now
I use advanced healthbars, but I switched between the 4 options and it happens with all of them.
try now, it should be betterI'm also now getting massive lag that is directly attributable to the UI. When I go back to the default UI that lag is completely gone. (I'll send a copy of my current profile) In fact, everyone I know is experiencing lag when using the UI.
Also, hotbars aren't staying minimized between sessions. I have a few I close, but they're always open again when I log back in.
I think the problem is the same that Dot_Warner has, give it a try nowNo, I actually didn't even know you could do that until now
One thing I noticed, if I reload the UI with Ctrl+R, the lag will go away with the character properties window and spellbook tooltip (actually I drop from 50FPS to 40FPS, so there is still a drop, but not crippling). It will come back the next time I login, but Ctrl+R seems to fix it for the meantime.
Sent you a different profile.this I can't replicate, it's all fine and with your profile
check for errors...
Performance is great for me after the last updatetry now, it should be better
I think the problem is the same that Dot_Warner has, give it a try now
it seems you have messed around with the settings
so it was the same bug! good to knowPerformance is great for me after the last update
I hadn't changed the chat setting in this profile in ages, and it had behaved the same as every other character. It was the last patch that changed it.it seems you have messed around with the settings
the chat alpha is set to 0.01 so it will never show the background or the tabs again, the properties are disabled (maybe you tried the properties showing point and clicked it?), anyway just fix those settings and all will be fine
the item properties on that profile are disabled, you must use again the "properties showing point" (action) to re-activate them again...
Hmm.. Ok. I haven't ever used that action...
That is how that action works, it shows the properties there instead of the mouse location and clicking it turns on/off the properties (CC has the same thing activable from the options). Probably when you removed the action you turned it off again, because nothing else turns off the properties
the check for EC Playsound is made every X (random number) of seconds. The more clients you have the more is probable that the number is the same for all of them, and when it happens the check fails and the popup shows...
Thanks! I wish I ran 10 clients at a timethe check for EC Playsound is made every X (random number) of seconds. The more clients you have the more is probable that the number is the same for all of them, and when it happens the check fails and the popup shows...
In a normal game you shouldn't require to play 10 clients at time (because in a normal game you have other people to play with), since here everyone needs 3-4 imaginary friends to play with, I'll see to change how it works so it won't be a problem
Changing the button name or the appearance of the popup are not a real solutions, I'll think of another reliable way to check if EC Playsond is active instead...
Typically I run 1-3, but even with only 2 clients running I can accidentally trigger the popup to switch to default UI. Even if there was just a slight delay before making the popup appear. Like, check if PlaySound is running, if not wait 5 seconds, check again, if still not, trigger popup. Not sure your current logic on checking for PlaySound. The popup typically disappears within 1-2 seconds after appearing when running multiple clients.
the logic is quite simple, the client writes a file with "check" inside the EC Playsound writes "OK" if it's activeThanks! I wish I ran 10 clients at a time
check now with the new systemThanks! I wish I ran 10 clients at a time
try now
those buttons are not for the patcher, try to download the patcher again, probably a file is gone missing somehow...
Getting the same thing. Looks like something deleted the "EC PlaySound" executable from the installation directory. Is that something your UI installs, or part of the EC install? Running UOPatch with Full File Check didn't bring it back either.
I am having the same issue after downloading the latest update for Pinco's. It worked perfectly fine last night. But tonight, not so much.
bho, maybe something went wrong with the upload of the patch, try again now
That did it. Works great again! Thanks!!bho, maybe something went wrong with the upload of the patch, try again now