Bandage Self macro

[Shot]

Anyone use the UO Macro for bandage self? I can't get it to work. Wondering if I need to add another line to it or something?

 

[~Antzy~Pantz~]

Make sure you don't "accidently" have another macro set to that key..
I always go to undress and set it to the key I want my bandage self on and it will say at the bottom used by so and so macro....
OH>.. thats if you are using assist bandage self lol

 

[jerseyboy]

Anyone use the UO Macro for bandage self? I can't get it to work. Wondering if I need to add another line to it or something?

i use the "spacebar" for my bandage self macro... no problems at all...u have to make sure ur inventory bag is open to use it... hope that helps..

 

[Kiminality]

"New Targeting System" needs to be enabled, too.
It should be enable as default.

 

[Dermott of LS]

...

Bandage in hot bar, Target: Self, Hotkey: Ctrl-Alt-A set to Nostromo button 06... works like a champ.

 

[Nexus]

Anyone use the UO Macro for bandage self? I can't get it to work. Wondering if I need to add another line to it or something?

I've used it before though I don't prefer it over the UOAssist Bandage Self since I can set it to a mouse wheel. But yea make sure you don't have other macro's mapped to the same key in either UO or UOA if you have it.

 

[Tina Small]

If you generally do not want to have the "new targeting system" turned on while using the 2-D client, here's a way to set up a UO bandage self macro:

• Under Options on the paperdoll, select the Interface tab (top right side of the gump) and make sure there is a check mark next to the last line, Disable New Targeting System, and click Apply or Okay.
• Also under Options on the paperdoll, select the Macro Options (bottom left side of the gump). Add a macro to the key stroke combo of your choice that has these lines in it: (line 1) Target System On/Off; (line 2) Bandage Self; (line 3) Target System On/Off. Click Apply or Okay. What this macro does is toggle on the target system so you can apply the bandage and then toggle it off again.

You can set up a similar macro for bandaging others using the BandageTarget command instead of Bandage Self.

Note: When you're scrolling through the list of possible macro commands, the Target System On/Off, Bandage Self, and Bandage Target commands are near the very bottom of the list.

I believe UOAssist also has a bandage macro, but I prefer having my bandage macros set up in UO itself rather than UOAssist so they still work during those (usually) brief periods when UOAssist isn't recognizing my UOA macros after a client patch.

 

[Shot]

Thank you all for your kind help. The problem was I had the new targeting system toggled off!

All better now.

 

[Kensai Tsunami]

OMG!!! thank you thank you thank you tina small!!!
did i say thank you? heh
you have just made my uo life that much better! i'm a stooge sometimes when it comes to the little things and i have tried over and over to figure out how to make that stupid hotkey work!

now i can bandage myself again and i dont have to use uoassist
yay!!

thx to you shot for doing the most obvious ...asking the question. DOH!
man i feel like an idiot!!