A problem on 2d client

[jrennodell]

Hello

I have this issue on 2d client, I've posted under Uotech as well. When I'm running mounted or on animal form, screen slides so slow as if I'm having a great lag but I checked it- I'm not lagging actually.

Thanks in advance.

 

[Scuzzlebutt]

Could be a bad video card or not enough RAM. Try running in 565 color mode see if it clears up any of it.

 

[Guest]

Also decrease the housing cache as low as it can go. The cache is buggy and slows you down, even tho it is supposed to speed you up.

 

[jrennodell]

<blockquote><hr>

Could be a bad video card or not enough RAM. Try running in 565 color mode see if it clears up any of it.

[/ QUOTE ]

Don't think my video card is bad, and RAM should be fine

I did try the 565 color mode, not working for me. Thanks tho

<blockquote><hr>

Also decrease the housing cache as low as it can go. The cache is buggy and slows you down, even tho it is supposed to speed you up.

[/ QUOTE ]

Just tried this one also, not working

Thanks.

 

[jrennodell]

Shameless bump

 

[Guest]

Is your monitor display set to 32bit or 16bit colour? 2D runs best in 16bit


(right click on windows desktop, select 'properties' from the menu. Then select the 'settings' tab look for 'color quality')

 

[Kat SP]

Hiya! After our conversation and experiments yesterday to try and resolve the problem, I asked some in Ventrilo last night about your problem and the consensus was that it could well be your graphics card.

Could you list that with your computer specs? Maybe someone in the know might have some helpful suggestions.

To those who might be able to help, he has tried the most obvious things one would try to resolve this. He's made various changes to the resolution, color mode, page flipping and some other things in the options panel. He has also reformatted his PC and reinstalled at least twice.

The important thing to remember with his particular problem is that he can move just fine on foot, but seems to lag [and its not latency] in animal form and while riding a mount.

Any ideas?

 

[jrennodell]

Thank you very much.

I'm not technical, going to list the display and system information of the report. I can list the whole report if needed.

(changed it to 16bit too, not working.. thanks tho )
------------------
System Information
------------------
Time of this report: 2/21/2008, 17:09:51
Machine name: ANTHALONT
Operating System: Windows XP Home Edition (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.070227-2254)
Language: Turkish (Regional Setting: Turkish)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: BIOS Date: 10/26/06 20:34:04 Ver: 08.00.12
Processor: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz (2 CPUs)
Memory: 1024MB RAM
Page File: 745MB used, 1714MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode

---------------
Display Devices
---------------
Card name: Radeon X1950 Series
Manufacturer: ATI Technologies Inc.
Chip type: ATI Radeon Graphics Processor (0x7244)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&amp;DEV_7244&amp;SUBSYS_0B121002&amp;REV_00
Display Memory: 256.0 MB
Current Mode: 1440 x 900 (32 bit) (60Hz)
Monitor: SyncMaster 940BW/199BW, SyncMaster Magic CX915BW(Digital)
Monitor Max Res: 1440,900
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6764 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 12/21/2007 05:08:18, 272384 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: YOK
Mini VDD: ati2mtag.sys
Mini VDD Date: 12/21/2007 05:53:20, 2843136 bytes
Device Identifier: {D7B71EE2-3104-11CF-DE69-182BA1C2CB35}
Vendor ID: 0x1002
Device ID: 0x7244
SubSys ID: 0x0B121002
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel: ModeMPEG2_C ModeMPEG2_D ModeWMV8_B ModeWMV8_A ModeWMV9_B ModeWMV9_A
Deinterlace Caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
{3C5323C1-6FB7-44F5-9081-056BF2EE449D}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,2) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{6E8329FF-B642-418B-BCF0-BCB6591E255F}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,1) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
{335AA36E-7884-43A4-9C91-7F87FAF3E37E}: Format(In/Out)=(NV12,0x3231564e) Frames(Prev/Fwd/Back)=(0,0,0) Caps=VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Enabled
DDraw Test Result: All tests were successful.
D3D7 Test Result: All tests were successful.
D3D8 Test Result: All tests were successful.
D3D9 Test Result: All tests were successful.

 

[Azural Kane]

Machine seems fine, make sure you're not using factory drivers, and post a tracert.

 

[imported_Gwendar-SP]

EA says they fixed that last patch - sure hasn't helped me any

 

[Spree]

That happens to on my 22inch wide screen /19 inch duel monitors. I have to reduce the size of the uo window so it isn't maximized. That fixed it. With KR I have to run it full screen or it lags/ locks up

 

[imported_BlacK RaiN]

<blockquote><hr>


Hello

I have this issue on 2d client, I've posted under Uotech as well. When I'm running mounted or on animal form, screen slides so slow as if I'm having a great lag but I checked it- I'm not lagging actually.

Thanks in advance.

[/ QUOTE ]

Have you tried checking the "enable fame skipping"

 

[Azural Kane]

<blockquote><hr>

<blockquote><hr>


Hello

I have this issue on 2d client, I've posted under Uotech as well. When I'm running mounted or on animal form, screen slides so slow as if I'm having a great lag but I checked it- I'm not lagging actually.

Thanks in advance.

[/ QUOTE ]

Have you tried checking the "enable fame skipping"

[/ QUOTE ]

dunno bout you but that option only slowed me down more :/

 

[Guest]

 

[jrennodell]

<blockquote><hr>

That happens to on my 22inch wide screen /19 inch duel monitors. I have to reduce the size of the uo window so it isn't maximized. That fixed it. With KR I have to run it full screen or it lags/ locks up

[/ QUOTE ]

That made sense since I'm running it on 19inch wide screen. But didn't work for me

Thanks.

<blockquote><hr>


Have you tried checking the "enable fame skipping"

[/ QUOTE ]

Checking this just made it worst =)
Thank you.

I'm playing around all the combinations of display options etc. but no luck still.

 

[Kat SP]

Have you tried updating the drivers for your video card?

 

[jrennodell]

Yes, I formatted because of it actually.. It has its own story hehe.. There is an issue related to ATI graphic cards, "zero display service" or something. So I had to do a clean wipe then I installed the latest driver.